Basic safety notes
05.00 | AGE-XY | Assembly and operating manual | en | 389007 9
2.6 Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
l
When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
l
Observe the valid safety and accident prevention regulations.
l
Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
l
Wear heat-resistant protective gloves when handling hot
surfaces.
l
Wear protective gloves and safety goggles when handling
hazardous substances.
l
Wear close-fitting protective clothing and also wear long hair
in a hairnet when dealing with moving components.
2.7 Notes on safe operation
Incorrect handling of the personnel
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
l
Avoid any manner of working that may interfere with the
function and operational safety of the product.
l
Use the product as intended.
l
Observe the safety notes and assembly instructions.
l
Do not expose the product to any corrosive media. This does
not apply to products that are designed for special
environments.
l
Eliminate any malfunction immediately.
l
Observe the care and maintenance instructions.
l
Observe the current safety, accident prevention and
environmental protection regulations regarding the product's
application field.
2.8 Malfunctions
Behavior in case of malfunctions
l
Immediately remove the product from operation and report
the malfunction to the responsible departments/persons.
l
Order appropriately trained personnel to rectify the
malfunction.
To Next Page
Loading...
Need help?
General
