SCHUNK AGE-XY - 4.3 Installing the Sensors

Assembly
05.00 | AGE-XY | Assembly and operating manual | en | 389007 15
4.3 Installing the sensors
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is equipped for the use of sensors.
l
For the exact type designations of suitable sensors, please see
the catalog datasheet.
l
For technical data for the suitable sensors, see Assembly and
Operating Manual and catalog datasheet.
– The Assembly and Operating Manual and catalog datasheet
are included in the scope of delivery for the sensors and
are available at schunk.com.
l
Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
4.3.1 MMS 22 magnetic switch
ca.
brown
black
blue
load
closer
CAUTION
Risk of damage to the sensor during assembly!
l
Observe the maximal tightening torque.