SCHUNK PGN-plus-P 64 - Gripping Force Dropping

Troubleshooting
05.00 | PGN-plus-P | Assembly- and Operating Manual | en | 0389753
37
6.5 Gripping force is dropping
Possible cause Corrective action
Compressed air can escape. Check seals, if necessary, disassemble the
product and replace seals.
Too much grease in the mechanical move-
ment space.
Clean and lubricate product.
Maintenance [
}
38]
Pressure drops below minimum. Check air supply.
Pneumatic connection [
}
22]
Component part defective. Replace component or send it to SCHUNK
for repair.