SCHUNK PGN Series User Manual

General
6
11.00 | PGN | Assembly and Operating Manual | en | 389286
1.1.2 Applicable documents
• General terms of business*
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
1.1.3 Sizes
This operating manual applies to the following sizes:
• PGN 50
• PGN 64
• PGN 80
• PGN 100
• PGN 125
• PGN 160
• PGN 200
• PGN 300
• PGN 380
1.1.4 Variants
This operating manual applies to the following variations:
• PGN stroke 1
• PGN stroke 2
• PGN with gripping force maintenance "O.D. gripping" (AS)
• PGN with gripping force maintenance "I.D. gripping" (IS)
• PGN high-temperature (V/HT)
• PGN dust-tight (SD)
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.

SCHUNK PGN Series Specifications

General

Actuation	Pneumatic
Number of Fingers	2
Material	Aluminum
Type	Parallel gripper
Holding force without pressure	0 N
Operating pressure	4 bar - 8 bar