04.00|0889071 ROTA TP / ROTA TP-LH |en
Risk of fatal injury from suspended loads!
Falling loads can cause serious injuries and even death.
• Use suitable lifting equipment.
• Secure the product to prevent it from falling.
• Stand clear of suspended loads and do not step within their
swiveling range.
• Only move loads when supervised and do not leave
unattended.
• Wear suitable protective equipment.
Risk of injury due to sharp edges and rough or slippery surfaces
Wear personal protective equipment, particularly protective
gloves.
An eye bolt and an angle are included in the scope of delivery for
transporting lathe chucks with a size of 160 and above. These
chucks are only allowed to be transported on this eye bolt.
• Place the angle under the eye bolt on the distributor ring.
• Screw the eye bolt into the thread provided.
Using the angle prevents the distributor ring from slipping
backwards out of the chuck.
To Next Page
Loading...
