SCHUNK ROTA TP Series - Mounting with Bracket

Mounting
04.00|0889071 ROTA TP / ROTA TP-LH |en
39
Stationary mounting of the distributor ring
If the distributor ring is mounted in a stationary position, the
speed can be increased to the value provided in the table below.
ROTA
TP 125-25
TP 160-38
TP 200-55
TP 250-58
TP 315-90
Max. rotation speed
[min-1]
4200
4200
3800
3500
2500
a
1.1
1.1
1.5
0.8
1.7
ROTA
TP 315-105
TP 350-115
TP-LH 315-105
TP-LH 350-115
Max. rotation speed
[min-1]
3000
2200
2200
2200
a
1.5
In this case, the distributor ring is a component that is completely
separate from the chuck and is centered and retained on the
headstock of the lathe axially and radially by means of spacing
6.3.2