SCHUNK ROTA TP Series - 10 Translation of the Original Declaration of Incorporation

Spare parts
54
04.00|0889071 ROTA TP / ROTA TP-LH |en
Spare parts
When ordering spare parts, it is imperative to specify the type,
size and above all the manufacturing no of the chuck.
Seals, sealing elements, screw connections, springs, bearings,
screws and wiper bars plus parts coming into contact with the
workpiece are not covered by the warranty.
Item
Designation
1
Chuck body
2
Base jaw
3
Piston with thread
4
Bushing
5
Sealing disk
6
Piston cover
7
Mount
8
T-nut
9
Distributor ring
11
Centering sleeve
12
Spacer ring
13
Locking screw
15
Distributor ring cover
18
Double check valve
33
Copper bolt
34
Set-screw, DIN EN ISO 34827
35
Screws (DIN EN ISO 4762/7984)
36
Screws
37
Screws, ISO 4762
38
Screws – 10.9 (DIN EN ISO 4762/109)
39
Screws
40
Circlip (until 2015)
Lock nut (from 2015)
Screw (ROTA TP 315-105)
47
O-ring
48
O-ring
49
O-ring
50
O-ring
51
O-ring
8