SCHUNK ROTA TP Series - Page 58

Appendix on Declaration of Incorporation, as per 2006/42/EC,
Annex II, No. 1 B
58
04.00|0889071 ROTA TP / ROTA TP-LH |en
Appendix on Declaration of Incorporation, as per
2006/42/EC, Annex II, No. 1 B
1. Description of the basic safety and health protection requirements, as per 2006/42/EC,
Annex I, that apply to and are fulfilled for the scope of the partly completed machinery:
Product designation
Pneumatic Chuck
Type designation
ROTA TP / ROTA TP-LH
ID number
0816101; 0816102; 0816103; 0816111; 0816112; 0816113; 816121; 0816122; 0816123; 0816125;
0816128; 0816131; 0816132; 816133; 0816135; 0816138; 0816141; 0816142; 0816143; 0816145;
816148; 0816151; 0816152; 0816155; 0816158; 0816161; 0816162; 816165; 0816168; 0816150;
0816160; 081617
To be provided by the System Integrator for the overall machine
⇓
Fulfilled for the scope of the partly completed machine
⇓
Not relevant
⇓
1.1
Essential Requirements
1.1.1
Definitions
X
1.1.2
Principles of safety integration
X
1.1.3
Materials and products
X
1.1.4
Lighti ng
X
1.1.5
Des ign of machinery to fa cilitate its handling
X
1.1.6
Ergonomics
X
1.1.7
Operating positions
X
1.1.8
Sea ting
X
1.2
Control Systems
1.2.1
Safety and reliability of control systems
X
1.2.2
Control devices
X
1.2.3
Starting
X
1.2.4
Stopping
X
1.2.4.1
Norma l s top
X
1.2.4.2
Operational stop
X
1.2.4.3
Emergency stop
X
1.2.4.4
Ass embly of machinery
X
1.2.5
Sel ection of control or operating modes
X
1.2.6
Fai lure of the power supply
X
1.3
Protection against mechanical hazards
1.3.1
Ris k of loss of stability
X
1.3.2
Ris k of break-up during operation
X
1.3.3
Ris ks due to falling or ejected objects
X
1.3.4
Ris ks due to surfaces, edges or angles
X
1.3.5
Ris ks related to combined machinery
X
1.3.6
Ris ks related to va riations in operating conditions
X
1.3.7
Ris ks related to moving parts
X
1.3.8
Choice of protection against risks arising from moving parts
X
1.3.8.1
Moving transmission parts
X
1.3.8.2
Moving pa rts involved i n the process
X
1.3.9
Ris ks of uncontrolled movements
X
1.4
Required characteristics of guards and protective devices
1.4.1
General requirements
X
1.4.2
Special requirements for guards
X
1.4.2.1
Fixed guards
X
11