15
R
5. Power supply
To save power, the Analyzer turns itself off after 5 minutes unless a button is pressed or
a new test strip is inserted. When the Analyzer turns itself off, all test results obtained so
far remain in the memory. Battery life is expected at approximately 1000 measurements.
When the battery warning is displayed for the first time, approximately 50 measurements
can still be performed. In this case, replace the batteries as soon as possible.
When replaing the new batteries, you must re-enter the date and time. Use only AAA
alkaline manganese batteries.
Measurement results including the related measurement date and time as well as all
other Analyzer settings, remain stored even when no batteries are inserted.
Please respect the environment and dispose of used batteries according to your local
regulations and laws.
Do not throw batteries onto an open fire. There is a risk of explosion!
To Next Page
Loading...