SD LIPIDOCARE - Running a Lipid;Glucose Test

47
R
5. Running a test - Lipid/Glucose
Test Procedure
1. Insert a lipid test strip into the ‘Lipid Test Strip Slot’ of the Analyzer to be closed the
measurement Chamber Flap up to the stop. When the lipid test strip reaches the correct
position, you will hear a beep.
2. Insert a glucose test strip into the ‘Glucose Test Strip Slot’ of the Analyzer. When the glucose
test strip reaches the correct position.
3. Lipid parameter icon to test and glucose parameter icon, 'GLU', display together. At first you
should test glucose parameter in Lipid/Glucose mode which glucose parameter icon, 'GLU',
and blood symbol icon flash.
NOTE:
t Either lipid or glucose test strip can be inserted first.
CAUTION
t When ‘GLU’ icon flashes in Lipid/Glucose mode, you should not apply blood sample in the lipid test
strip.