71
R
CHAPTER 8.
Maintenance and Troubleshooting
1. Cleaning your Analyzer
Caring for the SD LipidoCare®Analyzer is easy. Just keep it free of dust. If you need to clean it,
follow these guidelines carefully to help you get the best performance possible;
To prevent malfunction of the Analyzer, keep the test strip slot free of blood, moisture, dirt, or
dust. Use a lint-free cloth dampened with water to clean Analyzer. Ensure the cloth is damp, and
not wet. Do not use an abrasive cloth or antiseptic solution, as these may damage the display
screen.
A clean optical measuring system is a basic prerequisite for determining precise measured values.
Therefore clean the Analyzer regularly and immediately after it becomes dirty. Always switch off
the Analyzer before cleaning it.
Use only the following items for cleaning:
t Ordinary lint-free cotton buds
t Ordinary lint-free tissues
t Ordinary disinfecting tissues
Do not use any disinfectant sprays or tissues or cotton buds which are dripping wet as the liquid
may enter the Analyzer and damage it.
To Next Page
Loading...