40
How to use the Capillary tube & Plunger *Only for lipid testing
1. Insert the plunger into the capillary tube.
* The red or blue mark is printed on the tube for a plunger.
2. Put the capillary tube at the blood on the finger.
* The black mark printed on the tube is foward to the finger.
3. The blood flows into the tube by capillary action.
4. Apply the blood to the application area of the test strip by pressing down on the plunger.
5. Close the flap to start the test. The test result will appear on the screen for 3 minutes.
t You should use the each color of the capillary tube for the capillary tube and plunger.
- Black for the blood sample
- Red or Blue for a plunger
t You collect the blood sample carefully for using caution to avoid air bubble.
To Next Page
Loading...