52
Understanding Glucose Results
The SD LipidoCare® Analyzer is plasma-equivalent for glucose testing. Your Analyzer glucose
results may be different from clinical lab results. This is due to normal variation. To compare your
Analyzer with lab results, follow the guidelines below.
Your glucose results
1. After 5 seconds testing time from applying a blood into glucose strip, you will receive a test
result, 10mg/dL to 600mg/dL.
2. If your blood glucose is above 600 mg/dL, you will receive a “HI” and is below 10 mg/dL,
you will receive “Lo”. In these cases, repeat the test with new gluocse test strip. If these
messages displayed again, contact your healthcare professional immediately.
BL
BL BL
BL
To Next Page
Loading...