EasyManuals Logo

Sea-doo 2004 3D RFI User Manual

Sea-doo 2004 3D RFI
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
CONTROLS/INSTRUMENTS/EQUIPMENTS
FUNCTIONS
1) Safety Lanyard (engine
cut-off cord)
The safety lanyard cap should be se-
curely snapped onto its post to be fully
operational.
F22L0CY
1
1. Safety lanyard on its post
Pulling the safety lanyard cap from its
post stops the engine operation.
WARNING
While engine can be stopped us-
ing the engine start/stop button,
good habits recommend that the
safety lanyard also be discon-
nected when stopping.
Attach the safety lanyard to the oper-
ator's Personal Flotation Device (PFD)
andsnapthecaptotheposttobeable
to start the engine.
Two short beeps indicates the sys-
tem is ready to allow engine start-
ing. Otherwise, refer to the TROU-
BLESHOOTING section for the coded
signals chart.
F22L1TY
1 2
1. Safety lanyard cap on the post
2. Safety lanyard secured on operator's PFD
F22L19Y
2
1
1. Safety lanyard cap on the post
2. Safety lanyard secured on operator's PFD
WARNING
Shouldtheenginebestopped,wa-
tercraft directional control is lost.
Always disconnect safety lanyard
when watercraft is not in operation
in order to prevent accidental en-
gine starting or to avoid unautho-
rized use by children or others or
theft.
30
______________________
www.SeaDooManuals.net

Table of Contents

Other manuals for Sea-doo 2004 3D RFI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sea-doo 2004 3D RFI and is the answer not in the manual?

Sea-doo 2004 3D RFI Specifications

General IconGeneral
BrandSea-doo
Model2004 3D RFI
CategoryBoat
LanguageEnglish

Related product manuals