MAINTENANCE CHART
Periodic Inspection
Routine maintenance is necessary for all mechanical products. A periodic inspec-
tion contributes to the product’s life span.
The following maintenance chart gives guidelines for regular watercraft servicing
scheduled to be performed by you and/or by an authorized Sea-Doo dealer. The
schedule should be adjusted according to operating conditions and use.
IMPORTANT: Schedule for watercraft rental operations or higher number of hour
use, will require greater frequency of inspection and maintenance.
The maintenance is very important, if you are not familiar with safe service prac-
tices and adjustment procedures, see your authorized Sea-Doo dealer.
I: Inspect, verify, clean, adjust, lubricate or
replace if necessary
EVERY
C: Clean
L: Lubricate
R: Replace
First
10 h
25 h
or
3 months
50 h
or
6 months
100 h
or
1 year
To be
performed
by
GENERAL
Lubrication/corrosion protection
(1)
L Customer
ENGINE
Support and rubber mount I I Dealer
Seals and fasteners I I Dealer
Exhaust system fasteners
(5)
I I Dealer
RAVE valve
(5)
C C Dealer
Counterbalance shaft oil level I I Dealer
Spark plug
(5)
I
(4)
R Dealer
Ignition timing
(5)
I Dealer
COOLING SYSTEM
Flushing C
(3)
Customer
Hose and fasteners I I Dealer
Engine drain tubes I
(1)
Customer
74
______________________
To Next Page
Loading...
Need help?
General