General
Only perform servicing procedures
which are detailed in this safety sec-
tion. Further assistance or informa-
tion can be obtained from your au-
thorized Sea-Doo dealer. In many
instances proper tools and training is
required for certain servicing or repair
procedures.
Maintain the watercraft and equip-
ment in top condition at all times. Ad-
here to the prescribed maintenance
schedules. An annual inspection of
the watercraft is always a good recom-
mendation that should be followed.
Always use spark plug cable ground-
ing device when removing spark
plugs.
The bilge should be kept clean of oil,
water or other foreign materials.
Do not attempt to lift the watercraft
without special equipment and train-
ing.
The engine and the corresponding
components identified in this guide
should not be utilized on product(s)
other than for which they were de-
signed. Maintenance procedures and
specified tightening torque should be
strictly adhered to. Never attempt re-
pairs unless the appropriate tools are
available. These watercrafts are de-
signed with parts dimensioned in both
the metric and the imperial systems.
When replacing fasteners, make sure
to use only those recommended by
BRP. If required, contact your au-
thorized Sea-Doo dealer for further
servicing information.
_____________________
73
To Next Page
Loading...
Need help?
General