I: INSPECT, VERIFY, CLEAN, ADJUST,
LUBRICATE OR REPLACE IF NECESSARY
EVERY
C: CLEAN
L: LUBRICATE
R: REPLACE
First
10 h
25 h
or
3months
50 h
or
6 months
100 h or
1 year
TO BE
PERFORMED
BY
O.T.A.S.
TM
SYSTEM
O.T.A.S. system operation I I Dealer
PROPULSION SYSTEM
Drive shaft protection hose I ➁ Dealer
Seal carrier L L Customer
Drive shaft/impeller splines L Dealer
VTS (Variable Trim System) (if so equipped) I I Dealer
Jet pump reservoir oil R I R Dealer
Jet pump cover pusher I Dealer
Impeller shaft seal R ➃ Dealer
Impeller and impeller/wear ring clearance R ➁ Dealer
Water intake grate I ➁ Customer
HULL AND BODY
Bailer pick-ups, check for obstructions I I Customer
Kart seat (if so equipped) I I Customer
Hull I I Customer
NOTE: Some items are inclu
ded in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
➀
Every 10 hours in salt water use.
➁ These items have to be initially checked after 25 hours. Thereafter, servicing to be
made as specified in this chart.
➂
Daily flushing in salt water or foul water use.
➃ Replace at 150 hours.
➄
Emission-related component.
76
______________________
To Next Page
Loading...
Need help?
General