Preseason Preparation Chart
NOTE: It is highly recommended that an authorized Sea-Doo dealer perform
the annual safety inspection and factory campaigns in addition to the preseason
preparation all at the same time.
OPERATIONS
TO BE
PERFORMED
BY
Lubrication/corrosion protection Operator
GENERAL
Spark plug replacement ➀
Dealer
Exhaust system condition (fasteners, hoses, etc.) Dealer
RAVE valve cleaning Dealer
Counterbalance shaft oil level Dealer
ENGINE
TDC setting
Dealer
COOLING SYSTEM
Inspection of cooling system hoses and components Dealer
Throttle
➁
cable inspection/adjustment Dealer
Fuel filter replacement Dealer
Fuel injection sensors verification Dealer
Fuel system; check valves, lines, fasteners,
pressurization
➁
Dealer
Filler neck, fuel tank and fuel cap condition
➁
Dealer
Fuel tank straps Dealer
FUEL SYSTEM
Refill fuel tank
Operator
Oil injection pump adjustment and bleeding Dealer
Oil filter replacement
Dealer
Oil injection reservoir straps Operator
LUBRICATION
SYSTEM
Oil injection reservoir filling Operator
Battery condition/charging and reinstallation Dealer
Battery, starter connections and routing
➁
Dealer
Monitoring beeper Dealer
ELECTRICAL
SYSTEM
Digitally encoded security system Dealer
Steering system adjustment/inspection
➁
Dealer
Steering pole condition
Dealer
Handlebar and adjuster condition Dealer
STEERING SYSTEM
“Moto” seat condition (if so equipped) Dealer
O.T.A.S.
TM
SYSTEM
Check O.T.A.S. system operation Dealer
_____________________
91
To Next Page
Loading...
Need help?
General