EasyManuals Logo

Sea-doo 2005 3D RFI User Manual

Sea-doo 2005 3D RFI
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
CAUTION:
To prevent permanent
deformation of the kart seat foam,
never leave any object on it during
storage.
Ifthewatercraftistobestoredout-
side, cover it with an opaque tarpaulin
to prevent sun rays and grime from af-
fecting the plastic components, water-
craft finish as well as preventing dust
accumulation.
CAUTION:
The watercraft should
never be left in water for storage.
Never leave the watercraft stored in
direct sunlight. Never completely
seal watercraft in a plastic wrap.
Ventilation must be provided to
avoid condensation and potential
corrosion.
Preseason Preparation
Use the following chart.
Since technical skills and special tools
are required, some operations should
be performed by an authorized Sea-
Doo dealer.
WARNING
Only perform procedures as de-
tailed in this guide. It is recom-
mended that the assistance of an
authorized Sea-Doo dealer be peri-
odically obtained on other compo-
nents/systems not covered in this
guide. Unless otherwise speci-
fied, engine must not be running
and the safety lanyard must be re-
moved from its post for all main-
tenance procedures. Components
inside engine compartment may
be hot. When components condi-
tion seems less than satisfactory,
replace with genuine BRP parts or
approved equivalents.
90
______________________
www.SeaDooManuals.net

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sea-doo 2005 3D RFI and is the answer not in the manual?

Sea-doo 2005 3D RFI Specifications

General IconGeneral
BrandSea-doo
Model2005 3D RFI
CategoryBoat
LanguageEnglish

Related product manuals