Seaga Quick Break Combo QB2000 - Page 48

48QB2000 9.2022 vers 1.0
6. Use number keys to enter value
7. Press # to save changes
8. Press * to exit to previous menu
MAX CHANGE
This option prevents change from being returned to the customer until the amount of credit has
been reduced to a value less than or equal to the programmed maximum change limit.
1. Press Service Mode Button
2. Press 6 for Advanced Menu
3.UsenumberkeystoenterPassword(2314)
4. Press 4 for Max Change menu
5. Press 1 for current Max Change setting
6. Press 1 to toggle ON/OFF
7. Press # to save changes
8. Press * to exit to previous menu
9. Press 2 and use number keys to enter dollar amount
10. Press # to save changes
11. Press * to exit to previous menu
SHUTDOWN
ThismenusetstheVMCtoshutdownAllItems,byRoworbySelection,basedonfour(4)time
of day intervals. If the time falls within one of these intervals and the entire machine has been
selected for shutdown, then the message, “Vending Operation to Resume at hh.mm,” will be
displayed.
If a row or individual selection has been set for Shutdown, the same message displays once every
timethecustomermakesthatselectionorselections(row).
NOTE: The correct time and date must be set so that the shutdown intervals work correctly. See
Time and Date section of this manual. Also, for any given day these four time intervals may overlap
each other. For each interval, the VMC can be programmed from no days up to every day of the
weekonwhichthespeciedshutdowntimeintervalsareactive.
SHUTDOWN BY ALL ITEMS
1. Press Service Mode Button
2. Press 6 for Advanced Menu
3.UsenumberkeystoenterPassword(2314)
4. Press 5 for Shutdown
5.Press1forInterval1(2forInterval2,andsoon)
6. Press 1 to for All Items
7. Press 1 to toggle ON/OFF
8. Press # to save changes
9. Press * to return to previous menu
10. Press 4 for Day menu
11. Press 1 for Every Day
12. Press 1 to toggle All Days ON/OFF
13. Press # to save changes