Seaga Quick Break Combo QB2000 - Troubleshooting Common Issues

62QB2000 9.2022 vers 1.0
Troubleshoong
1. SELECTION DISPLAYS SOLD OUT WHEN PRODUCT IS PRESENT
a. Product is not loaded correctly. Ensure product is located to the front
of the column and depresses sold out indicator.
b. A jam caused an error and Lockout – Press menu buon then 7 to
reacvate all lanes.
2. NO DISPLAY ON THE FRONT PANEL
a. Harness may be unplugged
b. Transformer circuit breaker tripped
c. Restart machine
d. Faulty display harness
e. Display board defecve
3. SELECTION WILL NOT VEND
a. Tray or Motor connecon unplugged or faulty connecon
b. Vend mechanism binding on tray
c. Product jammed
d. Defecve motor
e. Damaged tray/Beverage harness
4. MULTIPLE VENDS FROM ONE SELECTION
a. Broken or disconnected wire to motor
b. Defecve motor switch
c. Beverage lane not setup properly
d. Beverage sensivity adjustment set wrong
5. MULTIPLE VENDS MORE THAN ONE SELECTION SIMULTANEOUSLY
a. Harness faulty
b. Motor harness not plugged into the vend motor correctly
c. Defecve motor
d. Beverage “sensivity adjust” needs to be changed
e. Opcal vend accidentally turned on
6. UNIT WILL NOT ACCEPT MONEY
a. All Prices are set to zero or machine is set to Free Vend
b. Note: Will not accept bill if coins in coin changer below the minimum
level
c. Note: Will not accept more than one bill if the bill equal or exceeds the
highest priced item.
d. No power to system control board
e. Coin Mechanism or Bill acceptor defecve.
f. Harness to payment system is disconnected or faulty.