Seaga Quick Break Combo QB2000 - LIMITED WARRANTY; Warranty Terms and Conditions

75QB2000 9.2022 vers 1.0
LIMITED WARRANTY
Seaga warrants to the original purchaser that the equipment is free from defects in material and factory workmanship for a period of
one (1) year from date of shipment.
This warranty applies only if the equipment has been serviced and maintained in strict accordance with the instrucons presented
in the Operator’s Manual and no unauthorized service, repair, alteraon or disassembly has been performed. Any defects caused
by improper power source, poor water quality or pressure, an installed water ltraon system not fully funconing, abuse of the
product, accident, alteraon, vandalism, improper service and maintenance schedules, neglecng to de-scale and sanize on a
regular basis, use of products or ingredients not allowed in the machine, corrosion due to use of non-approved detergents or
cleaning soluons, or damage incurred during return shipment will not be covered by this warranty. Further, equipment that has had
the serial number removed, altered or otherwise defaced will not be covered by this warranty.
Lighng components, refrigerant, glass, paint, decals, fuses, lters or hygiene replacement parts, labor and/or installaon are not
covered by this warranty.
Follow proper maintenance procedures and use of equipment, as described in the Operator’s Manual provided on Seaga’s web site at
seagamfg.com, which include but are not limited to:
• Cleaning of equipment including regular maintenance
• Proper installaon and locaon of equipment with respect for the indicated temperature and
humidity levels
• Proper use of equipment including loading, programming and setup
THIS WARRANTY IS EXCLUSIVE AND IS GIVEN BY SEAGA AND ACCEPTED BY BUYER IN LIEU OF ANY AND ALL
OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALL SUCH OTHER WARRANTIES ARE
HEREBY EXPRESSLY DISCLAIMED BY SEAGA AND WAIVED BY BUYER. Seaga neither assumes nor authorizes
any person to assume for it any obligaon or liability in connecon with the sale of said unit(s) or any part(s)
thereof.
Repair or replacement of proven defecve parts is limited to manufacturing defects demonstrated under normal use and service
during warranty period. Contact Seaga’s Customer Care Department to be assigned a Return Authorizaon (RA) number. Seaga
requires complete informaon including the serial number(s) of the machine(s), date of purchase and descripon of the part and/or
suspected defect. Seaga may also be contacted, with complete informaon, by phone: 815.297.9500, by fax: 815.297.1700 and also
by email: customercare@seaga.com
Send defecve part(s), assembly or complete unit, Aenon to the RA Number, prepaid or delivered to:
700 Seaga Drive
Freeport IL 61032
Seaga will repair or replace, at our opon, any covered part which meets the provisions herein during the warranty period. It is
our discreon to replace defecve parts with comparable parts. Seaga reserves the right to make changes or improvements in its
products without noce and without obligaon, and without being required to make corresponding changes or improvements in
equipment already manufactured or sold.
SMI2456321