Seg WI Series - Page 106

ExP[2] . Trigger Signal [Protection Para / ExP[2]]
• “-”•
• “-”•
• “-”, Prot . DI 1, Prot . DI 2•
• “-”•
•
“-”
•
If: Device Variant/Inputs = Ext. Trip
• “-”•
• “-”•
•
“-”
•
•
“-”, Prot . DI 1, Prot . DI 2
•
• “-”•
• “-”•
•
“-”
•
If: Device Variant/Inputs = Ext. Trip, Ext. Reset
•
“-”
•
•
“-”
•
•
“-”, Prot . DI 1, Prot . DI 2
•
•
“-”
•
•
“-”
•
•
“-”
•
•
“-”
•
If: Device Variant/Inputs = Con󰊟gurable
•
“-”
•
•
“-”, Prot . DI 1, Prot . DI 2
•
•
“-”
•
•
“-”
•
•
“-”
•
•
“-”
•
• “-”•
If: Device Variant/Inputs = Con󰊟gurable Inputs
• “-”, Prot . DI 1, Prot . DI 2•
╚═▷
Assign the trigger signal that will make the »ExP« module start (pickup).
106 WIC1 WIC1-2.0-EN-REF
9 Protection Parameter
9.19.2 ExP[2]: Settings