508.366.1488 | www.semshred.com
22
Figure 14. Two painted side bolts to remove
4. Unlatch the four latches holding the mid-hopper adapter to the bottom of Stage 1 (Figure 15). There are
two latches in the front and two in the back.
Figure 15. Four latches to unlatch
5. Pull down the mid-hopper adapter if it doesn’t drop after you release all four latches.
Figure 16. Location of mid hopper adapter
6. Pull cutting chamber drawer all the way out (Figure 17).
7. Using a 7/16” socket wrench, remove the four bolts securing the hopper (Figure 18).
To Next Page
Loading...