Sencor SLE 40FS702TCS - Picture and Sound Settings; Picture Quality Adjustments; Advanced Picture Configuration

14
EN
Picture and Sound
Adjusting the Picture Quality
Adjust picture mode, picture size and other advanced picture
settings.
Choosing a picture mode
/ >
Settings > Picture > Picture Mode
Select a pre-set picture mode to best suit the content you are
viewing.
Options may dier depending on your model/country/region and
the content you are watching. Please refer to the specic product.
Standard
Use Standard mode for watching normal content, such as News,
Drama or Documentaries.
Cinema Day
Use Cinema Day for watching movies in a bright environment.
Cinema Night
Use Cinema Night for watching movies in a dark environment.
Dynamic
Use Dynamic mode for content that requires vivid picture
quality.
Sports
Optimised picture for watching sports.
Changing the aspect ratio
/ >
Settings > Picture > Aspect Ratio
Adjust the Aspect Ratio to stretch or zoom the picture.
Automatic
Automatically switch Aspect Ratio between 16:9 and 4:3 based
on the signal information.
16:9
Best suited for 16:9 Widescreen content. This will also stretch 4:3
content to Widescreen.
4:3
Best suited for 4:3 content.
Movie Zoom
Fill the entire screen by zooming in to remove horizontal black
bars from the top and bottom of the picture.
Conguring advanced picture settings
/ >
Settings > Picture > Picture Mode
Settings
Adjust display settings for each Picture Mode. You can personalise
the picture quality by adjusting the following settings.
Apply Picture Settings
Adjust current picture mode to apply to all sources or just cur-
rent source.
Backlight
Set the overall brightness of the screen.
NOTE
 The function name may vary depending on models.
The following option may dier depending on models. Please
refer to the actual product.
Dynamic Backlight Control
Enhance the contrast ratio between light and dark areas of the
picture.
This function may not be applicable in some models/countries/
regions.
Backlight
Adjust how bright you want images to appear, lower settings
create darker images (only when Dynamic Backlight Control is
o ).
This function may not be applicable in some models/countries/
regions.
Brightness
Adjust the Brightness level to generate lighter or darker images.
Contrast
Adjust the Contrast level to increase or decrease how bright
images appear.
Colour Saturation
Adjust the colour intensity of the picture for a more vibrant
image.
Sharpness
Adjust how sharp or soft edges of images appear.
Adaptive Contrast
Automatically adjust dark areas and light areas of the image to
see more detail.