Sencor SLE 40FS702TCS - Accessibility and System; Language and Location Settings; Usage Mode Selection; Software Update Management

18
EN
Accessibility and System
Content Block
Certain programmes are blocked by age rating. This is controlled
by the broadcaster.
Input Block
Block content from devices that are connected to external
inputs.
App Block
Block access to certain apps.
Reset to Default
Restore Parental Control back to the factory default setting.
Setting Language and Location
/ >
Settings > System > Language and Location
Select the language used for this TV and your location.
Location
Choose the location from where you will watch your TV.
Menu Language
Set the default language for the TV menu.
Primary Audio
Set the default audio output language for the type of digital
broadcast content that you are viewing.
Secondary Audio
Set the secondary audio output language for digital broadcast
content.
Digital Teletext
Adjust Teletext decoding.
Setting Usage Mode
/ >
Settings > System > Advanced Settings
>Usage Mode
Set the TV to use in Home or Store mode.
Home Mode
Select Home Mode for normal TV usage.
Store Mode
Select Store Mode to setup the TV in a retail setting. This mode
enables E-Pos and other demo functions and is only intended for
use in retail stores.
When Store Mode is selected, press
/
button on your
remote control to enter store mode settings.
NOTE
 Enabling Store Mode could increase energy consumption.
Checking the Software Version
To check the current software version of your TV:
Access
/ >
Settings > Support > System Info >
Version.
Software Upgrade
/ >
Settings > Support > System Upgrade
Set your TV to receive the latest rmware.
Auto Firmware Upgrade
Set your TV to automatically receive the latest rmware.
Check Firmware Upgrade
Check to ensure that your TV has received the latest rmware.
Please ensure your TV is connected to the Internet.
System App Auto Upgrade
Set your system applications to automatically upgrade to the
latest version. App auto upgrade will be completed in the bac-
kground, conrmation on new Privacy Notices may be required
to complete any upgrades.
Upgrade from USB
Upgrade TV software from USB device.
NOTE
 Please ensure the USB ash drive insert to USB 2.0 port of the TV.
 The update les must be located in the root directory of the
update USB device.
 The format of the USB must be FAT32 and the partition table
type must be MBR.