9
Live TV
Using PVR
To use the PVR recording and time-shift functions, it is required
that a SUFFICIENTLY FAST USB memory stick/disc with a min-
imum capacity of 2GB and FAT32 or NTFS formatting be con-
nected. If the memory is incompatible, not fast enough or with
uctuating speed, the PVR function will show errors or the TV
will reject such memory. In such case, please connect another
memory or disc.
The PVR function is available for digital TV channels only. Some
TV channel providers may disable the PVR function. Some chan-
nel parameters may collide with the PVR features and in such
case, the TV will show a notication on this.
The PVR features are subject to local and legal restrictions in
some countries.
PVR recording
A digital channel program recording can be scheduled (Sched-
uled Recording), see chapter EPG. Make sure that you enter
particularly the time data accurately and save the scheduled
task.
The recording will start and stop in accordance with this data.
You can also record the program directly by pressing PLAY/
PAUSE. An overview of PVR features controlled by the cursor
arrows will be shown. The UP arrow
(red button) will show
the recording data setting. Please store the data after checking.
The recoding will start. To stop the recording manually, press
PLAY/PAUSE, then select the DOWN arrow (square). The TV will
ask whether to save (keep) or erase the recording made so far.
NOTE
If the TV is switched o by pressing the Power button while
the recording task is in progress, the screen will turn o, but
the set TV task will be completed (ashing LED).
Watching the recordings
To watch the previously made recordings, press MENU >
Recording List. Select the required recording by pressing the
UP/DOWN arrows, then press OK to start. In the same menu, you
can also view the scheduled task list (Scheduled) by pressing the
RIGHT arrow button.
To erase a recording, press MENU, press OK to select, then press
Erase (RIGHT) to conrm.
The time scale and the playback control bar will be shown briey
during playback. When they disappear, you can display them
again by pressing the arrow buttons, such as UP.