ADN Digital Conference System | 171
Using the “Conference Manager” software
Deactivating manual switch-off of the wireless conference units –
“Enable Wireless Unit shutdown“
To prevent accidental switch-off of the wireless c
onference units, you can deacti-
vate the manual switch-off function (see page 79).
왘 Tick/untick the “Enable Wireless Unit Shutdown” check box:
왘 Click “Apply” or “OK“.
The wireless conference unit
s can be switched off as set.
Setting Manual switch-off of the wireless conference units
activated Individual conference units can be switched off
manually by pressing the microphone key for
5 seconds (see page 79).
deactivated Individual conference units can no longer be switched
off manually.
The “Enable Wireless Unit Shutdown” is also deactivated in “Push to talk”
mode
.
To Next Page
