To Next Page

To Previous Page

Chapter 3: Zone Programming

Datalogging Mode: The WEB600 has two modes of data logging for each zone: Continuous or While In

Alarm. In Continuous mode the unit will log the value of the input on a fixed time interval all the time.

The Normal Interval sets the logging rate while the value is within the normal range. The Alarm Interval

sets the logging rate while the value is an alarm condition. By choosing the While In Alarm mode you

can choose to have the unit only log values when it exceeds the alarm limits. This option minimizes the

amount of data collected and maximizes the storage capacity inside the WEB600.

Normal Datalog Interval: This is the interval that data will be logged while the input is within the pro-

grammed alarm limits. To maximize the available memory for datalogging, set the Datalog Interval for

each zone to multiples of each other. For example, Zone 1 can be set to 30 seconds, Zone 2 to 1 minute,

Zone 3 to 5 minutes, etc…

Alarm Datalog Interval: This is the interval that data will be logged while the input is beyond the pro-

grammed alarm limits. (Note: this is regardless of the programmed Alarm Recognition Time).

Datalogging Capacity:

The datalogging capacity of the Web600 varies depending on how many zones you’re logging and what

the logging interval is for each. Memory is maximized if the logging interval for each zone is in mul-

tiples of each other. For example, if Zone 1 is set to 1 minute and Zone 2 is set to 5 minutes, you’ll get

CFUUFSNFNPSZVTBHFUIBOJG;POFXFSFTFUUPNJOVUFBOE;POFXBTTFUUPNJOVUFT)FSFBSF

some typical results:

t*GZPVPOMZMPH[POFBUBOZJOUFSWBMUIF8FCXJMMTUPSFBNBYJNVNPGTBNQMFT

t*GZPVMPH[POFTBUUIFTBNFJOUFSWBMUIF8FCXJMMTUPSFTBNQMFTPGFBDI[POF

t*GZPVMPHBMM[POFTBUUIFTBNFJOUFSWBMUIF8FCXJMMTUPSFTBNQMFTPGFBDI[POF

Once the datalogger is full it will start overwriting the oldest records.

Sensaphone WEB600 User Manual

Questions and Answers: