Io
SENSOR
Section 1 Introduction
SMT-200 Operations and Technical Manual 2.00/R1
5
Leakage Test
Range 1M to 100M ohm (measured at 5V max)
Accuracy ± 5% of measured value (after calibration)
Test Storage
Capacity 2 MB FLASH disk typically storing 16000 records
Actual figure will depend on tests selected and tags stored
Physical Characteristics
Dimensions (Approx.) 270 x 110 x 60 mm (10.63 x 4.33 x 2.36 inches)
Weight (Approx.) 1.5 kg (3.30 lbs.)
Environmental Specifications
Operating temperature range -20 to 60 °C ( -4 to 140 °F)
Storage temperature range -40 to 70 ° C (-40 to 158 °F)
NOTE: All capabilities are measured at 20 °C.
1.5 Packaging information
Before getting started please check the package is complete with the following items:
• Transport case
• SMT-200 including carry strap
• Two Battery packs
• Docking Station
• Reference geophone SM4/U-B 10Hz 375 ohm
• Geophone cable Bendix to unterminated incl. temp sensor in Bendix connector
• Cable SMT-200 to Docking Station, Bendix-C24
• Serial cable D9 to D9
• Serial adaptor D9 - D25
• Mains cable (Euro / US / or UK)
• Leakage probe
• Temperature probe
• Spare fuse 500 mA 250V
• Software diskette SMT-200 v2.00 & Docking station programs
• Operations and Technical Manual (this Manual)
• Certificate of calibration
To Next Page
Loading...