Io
SENSOR
Compliance
SMT-200 Operations and Technical Manual 2.00/R1
iii
Year 2000 Compliance
covering electronic equipment and software produced by
IOSENSOR
SMT-100
Transfer Program
Reader Program
The hardware and software used in the ‘SMT-100 Geophone Tester’ and
‘SMT-100 Fieldbox’ (model I and II) does not utilise a real-time clock and is
therefore immune from problems associated with the year 2000 issue. The
date (that can be manually set in the header of the printout) will accept the
year 2000 and higher. Also the associated ‘SMT-100 Module Reader’ and
RS232 data transfer ‘SMT-100 Xfer’ programs (both version 1.84 and higher)
will accept dates beyond 31 December 1999.
See Note
SMT-150
The SMT-150 hardware and associated ‘SMT-150 Geophone Tester’
program (version 1.84 and higher) will accept dates beyond 31 December
1999.
See Note
SMT-200
(Docking Station)
The SMT-200 hardware and software (version 1.89 and higher) and
associated ‘SMT-200DS Docking Station’ program (version 1.89 and
higher) are year 2000 compliant. Please note that during data transfer from or
to the PC and during updates of the SMT-200 program, the time and date of
the SMT-200 is synchronised with the time and date of the host PC.
* To prevent possible date conflicts it is strongly recommended to attach the
SMT-200 only to PC’s that are year 2000 compliant.
* To prevent possible update problems never update the SMT-200 software
from a PC that is not year 2000 compliant.
Note
The hardware and software has been tested on PC’s that are year 2000
compliant. Other than date and time stamp errors on files saved to PC’s that
are not year 2000 compliant, there are no other problems expected when
connected to PCs that are not year 2000 compliant.
IO
SENSOR can not be held responsible for the malfunction of the
above programs or loss of data when used on PC’s that are not year 2000
compliant.
Please contact one of our sales offices in case you encounter any problem.
IOSENSOR has adopted the BSI-DISC definition of ‘Year 2000 Conformity’:
“Neither performance nor functionality is affected by dates prior to, during and after the year 2000”
To Next Page
Loading...