SeQual Eclipse - 4. Flow Rate Error; Blocked Flow

11436 Sorrento Valley Road • San Diego, CA 92121 • www.sequal.com • 858.202.3100
13
Troubleshooting Guide
Troubleshooting Guide
4. Flow Rate Error / Blocked Flow
Eclipse is: BEEPING has a YELLOW BLINKING LED and the unit IS running
A. Ensure that the Oxygen Tubing and Nasal Cannula are not blocked or kinked
B. If a humidifier bottle is attached make sure it is not clogged? Replace it if necessary
C. Check to make sure Air Intake Vent (Filter) is not blocked. Replace it with a clean filter if
needed
i. If flow is still blocked: Exchange out the unit for evaluation and possible repair
In-Take Vent
Exhaust Vent