103
…
<boundary=...>
…
<FW binary data>
The client must wait as least 5 minutes to make sure all flashes have been
programmed.
Return: A FW Upgrade Progress window will be returned.
Upload/Download configuration
Download configuration content
Method: GET
URL: http://<ip>/adm/admcfg.cfg
Return:
HTTP/1.0 200 OK \r\n
…
content-type: application/configuration\r\n
\r\n
<configuration content encoded in Base64 format>
All data in the configuration are encoded in a Base64 format. Please refer to the
chapter.
There is the hidden check sum data inside the configuration content to validate the
data, Because we use the dword-aligned checksum algorithm, so we will ignore the
last data misaligned by dword.
Upload configuration content
Method: POST
URL: http://<ip>/adm/upload.cgi
Message body:
…
<boundary=...>
<configuration content encoded in Base64 fvormat>
All data in the configuration are encoded in a Base64 format. Please refer to the
chapter.
Network camera will be automatically rebooted after received and loaded the
configuration content.
Return:
HTTP/1.0 200 OK \r\n
…
content-type: text/plain\r\n
\r\n
OK\r\n
To Next Page
Loading...
