20
Chapter 4
Advanced Viewing Setup
This Chapter provides information about the optional settings and
features for viewing video via the Network Camera. This Chapter is
for the Camera Administrator only.
Introduction
This chapter describes some additional settings and options for viewing live Video:
• Adjusting the video image
• Controlling user access to the live video stream
• Making video available from the Internet
• Using the Motion Detection feature
Adjusting the Video Image
If necessary, the Network Camera Administrator can adjust the Video image.
To Adjust the Video Image:
1. Connect to the Web-based interface of the Network Camera. (See Chapter 5 -
Web-based Management for details.)
2. Select Administration, then Streamings. You will see a screen like the example
below.
Figure 19: Streamings Screen
4
To Next Page
Loading...
