112
Security Wireless security system, the value can be as below, and using ‘/’ to
express multiple selections:
None
WEP
WPA-PSK
WPA2-PSK
WPA-Enterprise
WPA2-Enterprise
Example for expressing multiple selections:
WPA-PSK/WPA2-PSK
AUTH Wireless authentication type, the value can be as below, ShareKey
type is only support in WEP security mode:
Unknown
OpenSystem
SharedKey
Encryption Wireless encryption method, the value can be:
Unknown
None
WEP
TKIP
AES
Mixed(TKIP+AES)
Channel Wireless channel, Integer type, the value can be 1~14
Signal Wireless signal, percentage, Integer type, the value can be 1~100, 100
is the strongest
WPS Expressing whether AP support WPS(Wi-Fi Protected Setup) function,
the value can be:
No
Yes
PBC
PIN-Code
Wireless status query
Method: GET
URL: http://<ip>/adm/wireless_status.cgi
Return: Network Camera will return a Web page that contains the following
messages.
To Next Page
Loading...
