SerComm
88
Audio only: rtsp://<ip>/img/audio.sav
If the client player is QuickTime player, there are always around 3 seconds
latency. If there is not audio content in the streaming, you can use the extension
parameter “[?|&]latency=no” to push QuickTime player to play the streaming
without any latency, but this method causes the frame rate is not stable.
Example: rtsp://<ip>/img/video.sav?latency=no
Note that camera is able to support the following four RTP protocols. But user
needs to specify the desired RTP protocol in the player.
1. Unicast RTP
2. Multicast RTP
3. RTP over RTSP (RTP over TCP)
4. RTP over RTSP over HTTP (HTTP tunnel)
Return: Video and/or audio will be returned.
To Next Page
Loading...
