Setra Systems Flex User Manual

5
© Setra Systems, Inc. All Rights Reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc.
1.2 Home Screen
The FLEX home screen is the view that will be continuously
displayed to the end-user, ensuring room environmental
conditions are clearly visible to indicate personal safety.
The screen is designed to display key room parameters,
and enable touch-screen operation when changes in
room conditions are needed, when additional information
is desired, or if alarms need to be acknowledged. Elements
of the screen are described below.
Room name
(Upto3congured)
Room navigation,
to view home screen of
rooms 2 and 3
Full screen mode
Set up unit
Banner indicates room
condition: NORMAL,
WARNING, ALARM,
or STANDBY
Two icons enable alarm
silencing. latch alarm
reset, or door indicator
Badges 5 and 6
(ifcongured)appear
off-screen and can be
accessed by swiping
left of right
Pull-down room
proles,user-
dened,tosetnew
monitor and control
setpoints in effect
Badges show room
parameters, values,
units, and state
Select from 32 icons
to represent room
use or none
Two lines of text
provide notices to
staff, or none
Introduction

Setra Systems Flex Specifications

General

Brand	Setra Systems
Model	Flex
Category	Control Unit
Language	English