Safety Features Safety Features/Start Up Sequence
______________________________________________________________________________
MillipaK 4QPM Controller Manual Page 49 13/08/03
Safety Features
The features listed in this section are designed with the safety of the operator in mind.
Start Up Sequence
At keyswitch on, the Direction and FS1 switches must be in the neutral condition simultaneously
at least once before drive can be selected. This is a safety feature to help prevent unexpected
movement immediately after power up.
Alternatively, the system may be programmed only to check FS1 at power on. This option is
programmable:
Power Up Direction Switch Checking
Calibrator Menu Reference:
12.08
Options Default
OFF ON OFF
To Next Page
Loading...
