Safety Features Safety Features/Anti-Rolloff
______________________________________________________________________________
MillipaK 4QPM Controller Manual Page 54 13/08/03
Anti-Rolloff
This feature is designed so that if a vehicle is powered up, without its handbrake applied, any non-
drive condition on a gradient results in the vehicle braking slowly, in a controlled way, down a
ramp without running away. The vehicle has to be stationary at least once after power up before
the feature is applied.
The Roll-Off Electro-brake option may be set so that the Electro-brake (if fitted & configured) is
applied (brakes on) when Roll-Off is detected.
The Roll-Off strength is not adjustable but can be enabled and disabled using the Roll-Off Enable
option.
Immediate Roll-Off Enable
Calibrator Menu Reference:
11.01
Options Default
OFF ON ON
Power On Roll-Off E-Brake
Calibrator Menu Reference:
12.05
Options Default
OFF ON OFF
To Next Page
Loading...
