Ordering Information Part Numbers
______________________________________________________________________________
MillipaK 4QPM Controller Manual Page 73 13/08/03
Ordering Information
The controllers and contactor panels are allocated 633 numbers as shown. The lettering section
gives the full listing of item types.
item description voltage current logic Customer Code
A= 2= 24 1= 100-199 1= SEM plug XX
B= 3= 36 2= 200-299 2= SEM plug s/start
C= Controller only 4= 48 3= 300-399 3= SEM regen
D= Traction panel 7= 72 4= 400-499 4= SEM regen s/start
E= Traction + Pump Panel 8= 80 5= 500-599 5= Series Pump
F= Twin Traction Panel 9= 96 6= 600-699 6=BPM
G= Twin Traction + Pump Panel 7= 700-799 7=BPM s/start
H= 8= 800-899 8= 4QPM
J= 9= 900 + 9= 4QPM s/start
K=
L=
M=
N=
P=
R=
S=
T= HP Controller only
W= HP Traction panel
X= HP Traction + Pump Panel
Y= HP Twin Traction Panel
Z= HP Twin Traction + Pump Panel
HP = High Power
For panels then the voltage, current and logic numbers should be used to describe the traction
controller.
Examples:
330A 4QPM controller 633T43801
330A 4QPM controller with Soft Start 633T43901
To Previous Page
Loading...
