SEW-Eurodrive MOVIDRIVE system User Manual

8
Installation
Covers
Product Manual – MOVIDRIVE
®
system
216
8.4 Covers
8.4.1 Covers
The application inverter is equipped with a safety cover [1].
Removing the
safety cover
1.
2.
[1]
5
4
3
2
1
14299394571
1. The safety cover [1] has a latching mechanism at the bottom. Pull the lower part of
the safety cover away from the application inverter to unlatch it.
2. Pivot the safety cover forward and lift it to remove it from the application inverter.
Installing the
safety cover
[1]
5
4
3
2
1
2.
1.
14578455307
3. Place the safety cover [1] into the upper recess and move it towards the applica-
tion inverter until it clicks into place.
4. Always install the safety cover [1] after having worked on the application inverter.
28487486/EN – 02/2019

SEW-Eurodrive MOVIDRIVE system Specifications

General

Category	Inverter
Series	MOVIDRIVE system
Output Voltage	0 - Input Voltage
Protection Class	IP20, IP65 (depending on model)
Type	Frequency Inverter
Output Current	Varies by model
Control Method	Sensorless vector control, V/f control
Communication Interfaces	CANopen
Safety	Safe Torque Off (STO), Safe Stop 1 (SS1)
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC