SEW-Eurodrive MOVIDRIVE system User Manual

8
Installation
Installing options and accessories
Product Manual – MOVIDRIVE
®
system
237
8.7 Installing options and accessories
8.7.1 Installing a card
Observe the safety notes in the chapter "Electrical installation"(→2223).
For information on which option card can be installed in which slot, refer to the chapter
"Card slots".
1. Disconnect the application inverter from the power supply. Disconnect the DC24V
supply and the line voltage.
2. Ensure electrostatic discharge with suitable measures before starting work. Suit-
able measures for equipotential bonding include, for example, the use of a dis-
charge strap or wearing conductive shoes.
3. Remove the safety cover [1] from the front of the application inverter.
1.
2.
[1]
5
4
3
2
1
14299394571
4. Remove the plastic cover [1] of the card slot using a screwdriver.
[1]
15160620811
28487486/EN – 02/2019
8

SEW-Eurodrive MOVIDRIVE system Specifications

General

Category	Inverter
Series	MOVIDRIVE system
Output Voltage	0 - Input Voltage
Protection Class	IP20, IP65 (depending on model)
Type	Frequency Inverter
Output Current	Varies by model
Control Method	Sensorless vector control, V/f control
Communication Interfaces	CANopen
Safety	Safe Torque Off (STO), Safe Stop 1 (SS1)
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC