SEW-Eurodrive MOVIPRO PHC21A-A075M1-E45C-C5 - Page 166

10
Technical data
DC 24 V backup voltage
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
166
10.4 DC 24 V backup voltage
X121.
Nominal input voltage U
1_N
DC24V-15%/+20% (EN61131-2)
Own consumption ≤500mA (with 24V)/15W
Total power consumption Own consumption + output current on buses and I/Os
Nominal output voltage DC24V −15%/+20%
corresponds to PELV according to EN61800-5-1
Nominal output current DC 3A
Power limitation at 100W output power
10.5 Axis data
Size Size1 Size2
Performance class 2.2kW 4.0kW 7.5kW 11kW 15kW 22kW
Axis type PFA MD022B MD040B MD075B MD110B MD150B MD220B
Connection designation X2012_.. X2016_..
Nominal output power S1 ac-
cording to EN600341
2.2kW 4kW 7.5kW 11kW 11kW,
15kW with
optional
fan
11kW,
22kW with
optional
fan
at PWM frequency = 4 kHz
Nominal output current AC5.5A AC9.5A AC16A AC24A AC32A AC46A
Current limiting AC8.25A AC
14.25A
AC24A AC36A AC48A AC69A
Motor and regenerative, duration depending on the utilization
Output voltage 3 × AC 0–500V
PWM frequency Adjustable: 4/8/12/16kHz
Speed range - 6000–0–+ 6000min
-1
Resolution 0.2min
-1
over the entire range
Temperature sensor for single
drive
TF/TH/KTY: When using devices designed for group drive (2 motor con-
nections), the temperature sensor contacts on the motor connection not in
use must be jumpered.
Temperature sensor for group
drive
TH (series connection via both drives)
Maximum motor cable length 30m
26596598/EN – 10/2020