SEW-Eurodrive MOVIPRO PHC21A-A075M1-E45C-C5 - Page 37

3
Device structure
Function units
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
37
Status display and status LEDs
The statusdisplay and status LEDs display status or error messages and thus enable
you to record the current state of the device.
For additional information, refer to chapter "Status and error messages" (→ 2 153)
and "Status LEDs"(→2154) and to the respective project-specific documentation. If
you have any queries, contact SEW‑EURODRIVE.
Ethernet service interfaces
2Ethernet service interfaces connect the device with an engineering PC for configura-
tion and maintenance purposes.
Service interface, application
Fieldbus diagnostics access
Service interface, local
• Extended diagnostics with direct ac-
cess to the fieldbus infrastructure
• Access via fieldbus IP address
• Full parameter and process data ac-
cess
• Access to file system
• Mirror port function
• Can be optionally blocked via the ap-
plication
• Excluded IP address range:
192.168.10.x
• Access to file system
• Fixed IP configuration:
– Standard IP address: 192.168.10.4
– Subnet mask: 255.255.255.0
26596598/EN – 10/2020