Page 32 of 40
9.4.3 - WELCOME TEXT
Position the cursor on WELCOME TEXT, press ENTER to access.
It’s possible to edit or delete the message that is displayed by the METER
during the ignition phase.
Use UP ARROW (up scroll) and SCROLL (down scroll) to change the digit;
ENTER to move the digit to the right. To confi rm press ENTER repeatedly
until leave the parameter.
LEFT ARROW to exit without changes
Default value: SGM-LEKTRA METER
DISPLAY VALUES
LCD CONTRAST
WELCOME TEXT
►
SGM-LEKTRA
METER
WELCOME TEXT
METER - advanced confi guration
To Next Page
Loading...