SGM LEKTRA METER - 9.8.6 - RESTORE SETTING; 9.8.7 INFO menu; 9.8.8 - INFO

Page 38 of 40
METER - advanced confi guration
9.8.6 - RESTORE SETTING
Position the cursor on SET UID, press ENTER to access.
Press ENTER to restore the METER default settings
LEFT ARROW to exit without restored the METER default settings
OUTPUT SAFE MODE
SET UID
LANGUAGE
FREQUENCY
F_WINDOW
RESTORE SETTING►
OK TO
CONFIRM
9.8.7 “INFO” menu
INFO
SGM-LEKTRA
METER
FIRMWARE REV.
IC
9.8.8 - INFO
Position the cursor on INFO, press ENTER to access.
In addition to information about the manufacturer, are displayed the
fi rmware revision and the confi guration index
SETUP
DISPLAY
DIAGNOSTIC
SERVICE
INFO
►
FIRMWARE REV
.
I.C.
SGM-LEKTRA
METER