At the end of a printing job, if the USB stick is not inserted, it is
not possible to start the same file again.
Internal memory file
Sharebot Q Dual is equipped with an internal solid state
memory able to save files permanently. The files contained in
the memory are available every time the machine is switched
on, until you delete them.
To copy, move or delete files in the internal memory, see the
DISPLAY section.
NOTICE: The internal memory is different from the temporary
memory used to load USB flash drive files during a printing job.
File from Web interface
The procedure to select files from a web interface is indicated in the Sharebox 3D chapter.
3.SETTINGS
Settings
Contains the commands to set and modify the machine operating parameters.
The Prepare
menu is visible only before starting a printing job, to set the machining
parameters. The Tune
menu is selectable only during the printing process to modify and
optimize parameters in real time.
17
To Next Page
Loading...