SHAREBOT Q Dual - File Operations Menu; Configurations Menu

19
Change Current Filament
Start Filament Change
Procedure of the currently
active extruder
Fan Speed
Override Fan Speed (0-255)
Enable Filament Detection
Enable Filament
Detection/movement
File operations Menu
Copy File
Copy A USB file from the
Internal Memory (or vice
versa)
Delete File
Remove a file from USB or
Onboard memory.
Configurations Menu
Network Config
DHCP or Manual IP
configuration menu for
Ethernet LAN.
WiFi Config
DHCP or Manual IP
configuration for Wireless
network
Probe Offset
Change the probe offset(s)
between the probe and the
nozzle(s)