Sharebot Suggested slicing profiles
On the Support page you may find the most up-to-date software profiles.
Slicing profiles are created to be the best compromise between quality
and speed.
Slicing profiles are usually good enough for most applications and are
also useful as a “starting point” for further optimization and
customization.
Customer care won’t be able to provide support for issues arising from
using non-standard configurations
Sharebot Suggested Slicers
Sharebot Racomends using only a selected group of
software for slicing, as time has proven they provide the
best results and consistency with Sharebot 3D printers.
By using these software and the specific profiles you are
more likely to reduce issues and quality defects.
Customer care won’t be able to provide support for
issues arising from using unproven softwares.
Sharebot Filaments and Materials
While Sharebot 3D printers are compatible with a range of third party
materials, we want to stress the importance of using first party
filaments.
Sharebot Filaments are continually used as a reference to improve
performance and quality of our 3D printers and are usually giving the
best results with the less effort, out of the box.
Customer care won’t be able to provide support for issues arising from
using third party filaments.
8
To Next Page
Loading...