SHAREBOT Q Dual - Start a Remote Print Job; Delete a File Remotely; Configure; Notifications

internal memory of the machine.
To load a file:
● GCODE upload (a pop-up window opens),
OR Select files (opens the Explorer window of the local computer),
● Choose the file with the Gcode extension.
The file is loaded into the machine's internal memory and appears in the file list in
alphabetical order.
Start a remote print job
From File Manager, you can start a print job by using a file in the machine's internal
memory.
● Print (opens a pop-up window),
● choose No / Yes to abandon or confirm the start of the print job.
Delete a file remotely
From File Manager, you can delete a file from the machine's internal memory.
● Select Delete (a pop-up window opens),
● choose No / Yes to abandon or confirm the deletion procedure.
The file is deleted from the internal memory of the machine and disappears in the
file list.
From this menu you can access various settings:
Configure
NOTIFICATIONS
The printer is able to send email notifications about the main events via Sharebox:
● Press start
● Eend of print
● Change filament
● Hardware problem
27
Section
Select:
Configure
Notifications